[잘만] Z10 PLUS : Middle Tower Case Computer Case Recommendation : Danawa DPG DPG my heart

#Computer Case #Recommended Computer Case #PC Case #Costume Case #Assembly Computer Case #Middle Tower Case

Zalman Z10 PLUS

Computer case with smooth air circulation design and convenient dust control!

A PC case with plenty of space inside and excellent assembly convenience!

A cost-effective case featuring maximum ease of use, such as a type C port and RGB conversion!

Introducing Zalman Z10 PLUS!

(Zalman Z10 PLUS: Product Box)

Here is a picture of the Zalman Z10 PLUS product box.

Mid tower case 488 x 220 x 481 mm (H x W x D),

Mini ITX, mATX, and standard ATX motherboards are supported.

There is enough space at the front and top for installing high performance radiators up to 360mm in size, respectively.

Through the strongest cooling solution that can install up to 11 cooling fans,

You can expect the maximum cooling effect even in extreme situations like high end games!

There is a CPU cooler with a maximum height of 173mm and a power supply with a maximum width of 200mm.

Plus, excellent expandability and ease of installation that supports graphics cards up to 395mm wide!

(Zalman Z10 PLUS: Body – Front)

The three 140mm cooling fans on the front of the case are ARGB applied.

In addition, you can expect a longer life and lower noise by using a hydro bearing.

In addition, the cooling-optimized front mesh bezel provides a smooth intake environment.

(Zalman Z10 PLUS: main body – front slide filter)

The case with the front mesh is about dust coming in.

Zalman Z10 PLUS has a front slide filter,

You can keep the inside of the system clean by preventing dust from entering.

It is easy to clean as all you have to do is remove the filter and shake it off.

The smooth air circulation design and convenient dust control combine performance and convenience at the same time!

(Zalman Z10 PLUS: main body – left side)

4mm thick high strength premium tempered glass is placed on the left side of the case,

It is suitable for gaming computers as it satisfies not only stability but also tunability.

Due to its excellent use of internal space and ease of assembly and use as well as its enormous size,

It also features high compatibility, designed to support the mounting of most parts.

Thanks to its spacious interior, as well as the three standard 140mm fans at the front and one 120mm fan at the back,

In addition, you can install 3 x 120mm fans on the top, 2 x 120mm fans on the bottom, and 2 x 120mm fans on the side.

(up to 11)

(Zalman Z10 PLUS: Body – Rubber Cover)

Look at the red circle in the picture above.

You can see that the rubber cover is applied.

Zalman Z10 PLUS has a high quality rubber coating,

Helps keep the inside of your system tidier!

(Zalman Z10 PLUS: main body – right side)

The side perforated panel is applied, so you can expect maximum cooling.

If you install a side fan, you won’t have to worry about overheating in any system!

In addition, the dust filter placed on the side exhaust is magnetic,

Designed for easy cleaning while keeping dust out!

In addition, with a line arrangement hole installed in the right place and a line arrangement space of 20mm for the convenience of users,

A neat and easy way to clean up annoying lines.

Spacious interior space and excellent assembly convenience are the features of Zalman Z10 PLUS!

When you open the right side of the case, the thing that is immediately apparent is,

4 power cooling fans and an ARGB controller connected in series!

Through the RGB control hub and the control button on the top of the product,

26 stunning LED patterns can be produced!

If you connect it to a motherboard 5v RGB pin header, you can create more colorful modes, right?

Here’s how to use the ARGB controller:

-Change LED pattern and color by pressing LED I/O button (26 patterns)

-If you press and hold the LED button for 3 seconds, the white light turns on once and then syncs to the motherboard.

-If you press and hold the LED button for 3 seconds, the white light turns on once, then turns on twice after 3 seconds, and the LED turns off

-If the LED button is pressed again, the synchronization of the main board is cut off and the controller pattern is changed at the same time.

(Zalman Z10 PLUS: Body – Top)

A magnetic dust filter is also applied to the top of the case.

It is an oversized dust filter that covers a size of 360mm!

The I/O ports include power button and reset button, HDD LED and power LED, headphone jack, microphone jack,

It includes two USB3.0 ports, one USB3.1 Type-C port, and an LED button.

This is a computer case that boasts maximum ease of use, such as a Type-C port and RGB conversion!

(Zalman Z10 PLUS: Body – Bottom)

At the bottom of the case, to reduce noise caused by vibration

All corners are padded with sponge.

There is also a dust filter on the bottom.

The same sliding dust filter as the front has been applied so it can be easily removed as it is on the bottom of the case!

(Zalman Z10 PLUS: Body – Back)

A 120mm ARGB cooling fan is also mounted on the back of the case.

The side plate is fixed by hand screw method.

Next to the PCI slot is a ventilation hole for better ventilation.

A total of 7 PCI slots stand out for expansion!

(Zalman Z10 PLUS: Components)

Here are the components included in the case.

It includes an instruction manual, cable tie, buzzer, rubber cap and screws.

(Zalman Z10 PLUS : graphics card support)

The Zalman Z10 PLUS computer case comes with graphic support (ZM-VS1) as standard!

Precise positioning is possible with the up and down slide holder method.

Additionally, if needed, the VGA support can be bolted to the hole on top of the power screen.

In the past, there were many opinions about the need for a support to prevent the graphics card from being bent.

At the time, it was difficult to find products made by such manufacturers.

By the way, if you buy a case, you will get support for the graphics card, so it is worth mentioning as a cost-effective case assembly computer case recommendation!

(Zalman Z10 PLUS: Assembled)

Here is a photo of an installed m-ATX size motherboard.

It makes me want to put ARGB cooling fans on top and on the side!

Specifically, around 5.5cm of space has been secured above the motherboard.

It seems that any size water cooler can be mounted on top without any hassle!

This is a video of booting the PC by pressing the power button after completing the service.

After booting, I tried to change the RGB pattern by continuously pressing the LED button.

※ Personal opinion about Zalman Z10 PLUS

Graphics card supports are easy to find these days, but in the old days there were none ready made, so I used to make my own with compression rods. This is the first time I’ve seen a PC case with graphics card support. It’s not enough to include a fan and a controller that supports ARGB, so I think it’s a real cost-effective case that includes graphics card support.

※ Purchase link: https://prod.danawa.com/info/?pcode=17192498

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.