Radeon Monster Profile “RMP” is an enhanced tuning utility for AMD RDNA 2 GPUs, which will be integrated into Hydra and published this fall.

Home » Tech » Radeon Monster Profile “RMP” is an enhanced tuning utility for AMD RDNA 2 GPUs, which will be integrated into Hydra and published this fall.

September 24, 2022
No Comments

CTR & Hydra author, 1usmus tuning utility Yuri Bubily.

This time, it will focus on GPU performance rather than CPU with a new tool called RMP or Radeon Monster Profile to achieve higher performance with RDNA 2 and even less power.

Radeon Monster “RMP” profile that maximizes the potential of AMD’s RDNA 2 GPU, coming this fall

According to Yuri, the Radeon Monster Profile aims to optimize the performance and wattage of AMD Radeon GPUs with a unique combination of settings using a new voltage / frequency curve.

This allows the graphics card to achieve its full potential.

Although the GPU is the main component of the graphics card, RMP pays special attention to the memory subsystem, lowering the operating voltage by 6% to reduce the power consumption and heat output of the GDDR6 memory modules.

RMP (Radeon Monster Profile) further improves performance by increasing the requested core (GPU) frequency compared to the operating voltage.

For example, the AMD Radeon RX 6800 XT graphics card can achieve a frequency boost of up to +300MHz for standard operation.

As a result, it is possible to improve performance by up to 13% compared to genuine products.

* Click on the image to open in another window/tab.

For example, the RMP-optimized AMD Radeon RX 6800 XT shows a 21% improvement in Frames/$ while using almost the same power as stock, which is quite impressive.

* Click on the image to open in another window/tab.

Radeon Monster Profile (RMP) contains several universal and customizable profiles.

They do not change any of the factory settings stored within the GPU’s BIOS, such as thermal throttling limits and fan speeds.

It also does not raise the operating voltage or change the current limit.

However, GPU cooling is a prerequisite for best performance with RMP.

A good cooling solution for your AMD Radeon graphics card can give you much better GPU results.

Most of the non-directional cooling solutions for the Radeon RX 6000 series are listed as meeting the minimum cooling requirements.

RMP (Radeon Monster Profile) will be integrated into the Hydra series used to tune AMD’s Ryzen CPUs when it launches this fall.

Multiple OC and tuning profiles with maximum allowed power will be introduced. The profile is currently under development, so the performance presented here may differ from the final product.

According to Yuri, RMP will support RDNA 2 GPUs at launch, but plans to support the upcoming RDNA 3 GPUs in the future.

アース: wccftech – Radeon Monster Profile “RMP” Is An Enhanced Tuning User For AMD RDNA 2 GPUs Coming This Fall, Integrated Within Hydra

Commentary:

It appears that software that optimizes Radeon operating settings will be published.

Its name is RMP (Radeon Monster Profile).

The RX6800XT listed as an example has a standard operating clock of +300MHz, and seems capable of good OC.

It is unclear if this will also update normal model OCs, or just base models.

Since it’s supposed to be integrated into the Ryzen Hydra CPU tuning tool, it seems there’s no choice but to try out the details.

The target is for RDNA2, and it appears that RDNA3 will also be targeted in the future.

I think it depends on the person if you like AMD because you can improve performance with such software, or if you feel that AMD settings are immature.

I’m the kind of person who feels like a little bit of victory.

Igor’s LAB – PROJECT HYDRA – OC Sandbox for ZEN3 CPUs | Download Freeware

Patreon – Yuri Babliy (Paid Hydra Pro version)

AMD’s series of Radeon GPUs

Radeon RX 6X50 series