Meze Audio 105 Silva Review: Hygge Headphones
- Okay, here's a breakdown of the data presented in the table, organized for clarity.It appears to be a comparison of three over-ear, open-back headphones.
- Headphone Comparison Table FeatureHeadphone 1Headphone 2Headphone 3TypeOver-earOver-earOver-earOpen/Closed BackOpen-backopen-backOpen-backDriver50mm dynamic; bio-cellulose, titanium-coated semicrystalline polymer50mm dynamic, bio-cellulose, PEEK38mm dynamicFrequency Range5Hz - 30kHz5Hz - 30kHz12Hz to 38.5kHzImpedance42 ohms42 ohms120 ohmsConnectorDual 3.5mm...
- * Driver Size: Headphone 1 and 2 have larger 50mm drivers, while Headphone 3 has a smaller 38mm driver.
Okay, here’s a breakdown of the data presented in the table, organized for clarity.It appears to be a comparison of three over-ear, open-back headphones. I’ll present it in a more readable format,and then summarize the key differences.
Headphone Comparison Table
| Feature | Headphone 1 | Headphone 2 | Headphone 3 |
|---|---|---|---|
| Type | Over-ear | Over-ear | Over-ear |
| Open/Closed Back | Open-back | open-back | Open-back |
| Driver | 50mm dynamic; bio-cellulose, titanium-coated semicrystalline polymer | 50mm dynamic, bio-cellulose, PEEK | 38mm dynamic |
| Frequency Range | 5Hz – 30kHz | 5Hz – 30kHz | 12Hz to 38.5kHz |
| Impedance | 42 ohms | 42 ohms | 120 ohms |
| Connector | Dual 3.5mm TS output | Dual 3.5mm TS output | proprietary locking cable output |
| Weight | 354g | 336g | 237g |
| Extras | Carry case, soft pouch for cables, 3.5mm TRS to dual 3.5mm TS cable, 3.5mm TRS to USB-C adapter w/ integrated DAC, 3.5mm TRS to 6.35mm TRS adapter | Carry case, soft pouch for cables, 3.5mm TRS to dual 3.5mm TS cable | (Incomplete data provided) |
Key Differences & Summary
* Driver Size: Headphone 1 and 2 have larger 50mm drivers, while Headphone 3 has a smaller 38mm driver. larger drivers generally can produce more bass and a wider soundstage, but it’s not the only factor.
* Driver Materials: headphone 1 and 2 use bio-cellulose in their drivers, but differ in the coating material (titanium vs. PEEK). These materials affect the driver’s responsiveness and sound characteristics.
* Impedance: Headphone 3 has a significantly higher impedance (120 ohms) than Headphone 1 and 2 (42 ohms). Higher impedance headphones typically require more power to drive them to their full potential, often needing a dedicated headphone amplifier.
* Connector: Headphone 3 uses a proprietary locking cable output,which means you’ll need to use the specific cable designed for it. headphone 1 and 2 use a standard dual 3.5mm TS output.
* Weight: Headphone 3 is considerably lighter (237g) than Headphone 1 (354g) and Headphone 2 (336g).
* Extras: Headphone 1 comes with the most comprehensive set of accessories, including a DAC/USB-C adapter. Headphone 2 has similar accessories,but the data is cut off. Headphone 3’s accessories are not fully listed.
in essence:
* Headphone 1 and 2 are very similar in many specs, differing primarily in driver coating material.
* Headphone 3 is a lighter-weight option with a smaller driver, higher impedance, and a proprietary connector. It may require an amplifier to sound its best.
Let me know if you’d like me to elaborate on any specific aspect or compare them further!