JONSBO Unveils C6 Handle Portable Case with Detachable Modular Body for Improved Heat Dissipation and Expandability
The legendary C2 small chassis now has a worthy successor in the form of the C6 Handle portable case, boasting a detachable modular body that significantly enhances heat dissipation and expansion capabilities. This innovative design challenges the common stereotype that small-sized cases lack expandability and suffer from poor heat dissipation.
Measuring a compact 266mm in length, 202mm in width, and 295.2mm in height, the C6 Handle defies expectations for a mATX case. It features round hole panels on the front panel, top cover, and side panels, delivering superior heat dissipation. The case is also equipped with impressive expansion options, allowing users to install two 2.5-inch devices or one 3.5-inch device on the front panel. Additionally, a 120mm fan can be installed if no hard disk is present, and a 120 or 140mm fan can also be mounted on the bottom, demonstrating remarkable expandability for a small chassis.
The I/O configuration includes USB3.2, USB3.2 Gen 2 Type-C, HD audio input/output jacks, and a power switch. The internal space can accommodate mATX motherboards, graphics cards of up to 255mm, and CPU radiators up to 75mm in height. Furthermore, standard ATX power supplies can be installed, showcasing the C6 Handle’s versatility.
In terms of practicality, the C6 Handle comes with a handle for easy transportation, a removable front panel, top cover, and side panels with mesh designs to improve heat dissipation, and a thoughtful polygonal plastic design on the corners to prevent injuries to the carrier when carrying the case. The case also features a reusable interface card baffle, further enhancing its user-friendliness.
Overall, the JONSBO C6 Handle portable case presents an impressive blend of compact size, robust expandability, and effective heat dissipation, making it a standout choice for users seeking a small yet versatile case.
The legendary C2 small chassis has a successor, with a detachable modular body, which greatly improves heat dissipation and expansion capabilities
Everyone has the stereotype that small-sized cases have poor expandability and poor heat dissipation. This time I will present a case that is small in size, has good expandability, and can be carried around, launched by JONSBO. The “C6 Handle” portable case, C6 Handle is 266mm long, 202mm wide, and 295.2mm high. It is very small for mATX case. The front panel, top cover and side panels all include round hole panels, providing an excellent heat dissipation effect, in terms of expansion, you can choose to install two 2.5-inch devices or one 3.5-inch device on the front panel. If you do not install a hard disk, you can also install a fan 120mm, and a 120 or 140mm fan can 120 or 140mm fan can also be installed on the bottom, which can be greatly expanded for a small chassis; I/O includes USB3.2, USB3.2 Gen 2 Type-C, and HD audio input/output sockets and power switch; the internal space can accommodate mTX motherboards at most, graphics cards can support up to 255mm, CPU radiators can support up to 75mm, and power supplies can be installed with standard ATX sizes. Now let’s look at the expansion JONSBO C6 Handle portable case now!
Body and accessories
▼ The outer box indicates the model, appearance and specifications of the product
▼ The product model and color are marked on the side There are two colors to choose from: black and white.
▼ Accessories include a product manual, cable ties*5, various fixing screws and a handle. The handle is passed around the fixed point on the casing and then fixed with Velcro felt.
▼ Body overview Handling C6. The overall size is relatively small. You can see the full round heat dissipation holes on the front directly, and the I / O configuration is below.
▼ I/O includes USB3.2, USB3.2 Gen 2 Type-C, HD audio input/output jacks and power switch
▼ The corners are made of polygonal plastic On the one hand, it is used for structural installation. On the other hand, it can reduce the sharp edges of the corners that can cause injuries to the carrier when carrying.
▼ The front panel is removable
▼The front panel can choose to install two 2.5-inch devices or one 3.5-inch device. If you do not install a hard disk, you can also install a 120mm fan. It is a multi-functional design, which allows players to choose back themselves.
▼Looking at the top, the top cover also has a round hole design, and there are hand designs on both sides. It can be taken off with the handle in the accessory by passing it through and placing it.
▼ The top cover is also removable and can be fitted with a 120 or 140mm fan.
▼ Rear view
▼ There is a top cover opening design at the top, which is convenient for players to open the top cover.
▼ The power supply is above the motherboard
▼ The first two pieces of the interface card baffle can be reused, and the remaining two pieces are disposable designs.
▼ Product model sticker
▼Looking at the bottom, there is a large area filter on the bottom, but to remove it for cleaning, you must remove the four feet first.
▼ There are non-slip rubber pads on all four sides of the base
▼ Looking at both sides, both sides are designed with round holes for ventilation, they are also installed without screws and are very easy to disassemble.
▼ The handle must pass through these two fixed positions before it can be safely carried.
Internal structure and actual assembly
▼ Overview of the internal space and configuration There are openings above and below the motherboard to facilitate cable routing.
▼ The motherboard can support up to mATX and has a design that eliminates the need to disassemble the motherboard to replace the processor backplane.
▼ A 120 or 140mm fan can be installed on the top cover
▼ The power supply is mounted above the motherboard
▼ The first two pieces of the interface card baffle can be reused, and the remaining two pieces are disposable designs.
▼ A 120 or 140mm fan can be installed on the bottom
▼The front panel has a composite design. You can choose to install two 2.5 inch devices or one 3.5 inch device. You can also install a 120mm fan.
▼ Actual installation picture, this time the hard disk installation uses two 2.5-inch SSD, the motherboard is iTX specifications, the overall space is sufficient
▼If the installed graphics card is not very long, you can also arrange and put the wires that are not used by the power supply there.
Summarize:
The portable case of JONSBO C6 Handle is really very compact, and it also has a detachable handle design, which is convenient for players to move the console and carry it. The internal structure must be a compact design, maximizing the expandability in limited space Good, and the removable front panel, top cover and side panels are all mesh designs, which can improve the heat dissipation effect. For expansion, a mATX motherboard and an ATX power supply can be installed. Two 120 or 140mm fans can also be installed. installed for heat dissipation The front The panel can be installed with two 2.5-inch or 3.5-inch devices If not all hard drives are installed, it can be turned into a 120mm fan. It is a very good design and allows players to After all, there is now M.2 expansion, 2.5-inch and 3.5-inch hard drives are no longer needed! ! Overall, the expansion of the C6 Handle is amazing, and it also has a good heat dissipation expansion design. Are you looking for a case product that is small in size and has good expansion capabilities? JONSBO C6 Handle portable case is a good choice!
#JONSBO #Portable #case #handling #successor #legendary #small #case #detachable #modular #body #heat #dissipation #expansion #capabilities..
