ZOTAC has always had a unique understanding of the size of a graphics card. As long as the heat dissipation performance can meet the needs, the size can be made smaller and not larger. This time, the RTX 4070 Ti launches the AMP AIRO version, which is shortened to 30 cm long and thinner. Some only have 3.9 slots. Although the size is still too large, they are relatively small models among RTX 40 series graphics cards, allowing gamers to have more choices when choosing a case.
Specification:
Graphics processor: NVIDIA GeForce RTX 4070 Ti
CUDA cores: 7680
Memory: 12GB GDDR6X
Memory interface: 192-bit
Core Boost Clock: 2670 MHz
Memory Clock: 1313 MHz
Memory data rate: 21 Gbps
PCI Express: 4.0 x16
Output interface: 3 x DisplayPort 1.4a, 1 x HDMI 2.1a
HDCP support: 2.3
Power supply interface: 1 x 16-pin 12VHPWR
Recommended power supply: 750W
Dimensions: 307.7mm x 125.2mm x 58.5mm (2.9 Slots)
ZOTAC GAMING GeForce RTX 4070 Ti AMP AIR Movie
The middle and high-end models of ZOTAC graphics cards mainly consist of three categories: ArcticStorm, AMP and Trinity. However, in the RTX 40 series, the RTX 4090 and RTX 4080 only have high-performance Extreme AMP models in the AMP category, and this time the RTX 4070 Ti finally launched the AMP style, which has a compromise style of performance and size to choose from.
In terms of graphics card size, the size of the RTX 4070 Ti AMP AIRO is only 30 cm, and the thickness is 2.9 Although the slot is still very thick, it is smaller than the huge RTX 40 series, and most of the cases are relatively friendly to install.
The RTX 4070 Ti AMP AIRO core part has 60 SM units, 7680 CUDA cores, including 240 fourth-generation Tensor cores and 60 third-generation RT cores, and supports dual DLSS and NVENC encoders. slightly lower than the AMP Extreme version.
→ ZOTAC GAMING RTX 4070 Ti AMP AIRO package appearance.
→ Product characteristics are on the back of the pack.
→ Graphics card and accessories.
The RTX 4070 Ti AMP AIRO graphics card is still provided with a 12VHPWR connector in the power supply part, so the accessories are also provided with the original NVIDIA 12VHPWR to three 8-Pin power supply conversion cables, and if it is paired with a new one, there are direct 12VHPWR cables If it is an ATX 3.0 certified power supply, you need to pay attention that 12VHPWR supports at least 300W power supply.
→ 12VHPWR to three 8-Pin power supply conversion cables.
→ 16-Pin connector.
→ Three 8-Pin connectors.
There is also a simple graphics card support frame in the accessories. If the case does not have a graphics card support frame when the machine is installed, or if you do not buy an additional graphic card support frame, the card support frame can This simple graphics provide a horizontal or vertical layout Strong support.
→ Video card support frame.
→ Schematic diagram of the use of the video card support bracket.
2.9 Slots 3 Thin Fans RTX 4070 Ti
The previously unpacked RTX 4070 Ti AMP Extreme AIRO still maintains a thickness of 3.5 slots to meet the high performance heat dissipation requirements. The thickness of the RTX 4070 Ti AMP AIRO that I started this time is a little thinner, and the thickness of the 2.9 slot is paired with three The front, rear, and front-rotating 90mm fans can improve the efficiency of air intake.
→ ZOTAC GAMING RTX 4070 Ti AMP AIRO front view.
→ Forward and reverse 9-blade fans in stages.
On the side design, you can see the design of the luminous light bar. The laser effect is used to achieve a color gradient visual effect when the light is not on. After the light effect is on, the curvilinear light effect corresponds, echoing the air flow optimization scheme.language.
→ List of graphics card side appearance.
→ List of side effects of lighting.
The side interface part can be seen that the power supply interface adopts 12VHPWR 16-Pin interface, and the display output part is provided with 3 Displaiport and 1 HDMI interface, the bezel is provided with 2 slots, and the head another decorated with ARGB light strips.
→ 16-Pin 12VHPWR Connector.
→ The output list is displayed.
→ ARGB light bar at the end of the graphics card.
There is a full metal backplane on the back of the graphics card, which can provide firm support for the graphics card and additional passive heat dissipation. You don’t have to worry about being stuck by the soldering points on the PCB during installation, and you can see that the Logo part has no light emitting design on the side. , and the other side has a large area of openings, which allows the airflow in the cooling air to quickly remove the waste heat.
→ List of metal quilt table appearance.
→ The metal quilt is designed with a large area of holes.
→ Gradient printing logo.
IceStorm 2.0 upgraded cooling system, 8 + 3 phase power supply
The RTX 4070 Ti AMP AIRO radiator part adopts the upgraded IceStorm 2.0 cooling system. The radiator, which is one size smaller than the AMP Extreme, adopts a 6 heat pipe configuration, and the nickel-plated copper base plate is used in the middle. to dissipate the core and memory waste heat.
→ Disassembly list of the radiator.
→ The center of the radiator is a nickel-plated copper bottom plate, and the two lower areas are penetrated by 5 S-shaped heat pipes and 1 U-shaped heat pipe.
→ The metal back plate has thermal paste to help the memory dissipate heat.
After removing the radiator, you can see the RTX 4070 Ti core chip code named AD104-400-A1 in the middle of the PCB The power supply part adopts 8 + 3-phase digital power supply design, and the memory is 6 pieces of Micron’s 2GB GDDR6X memory particles called D8BZC.
→ Overview of the front side of the PCB.
→ Overview of the back side of the PCB.
→ RTX 4070 Ti core chips and 8 + 3 phase digital power supply.
→ Meguiar memory particles.
Firststorm Software
The appearance of the new Firstorm software is more technological, but in addition to this, the information is divided into 5 tabs in the design, including data monitoring, fan settings, performance tuning and lighting effect settings, allowing players adjust each setting more easily. .
→ On the home page of Firstorm software, you can perform performance tuning, and there is a single OC Sacnner overclocking key in the lower right corner.
→ Information monitoring page.
→ Fan installation page.
→ Lighting effect setting page.
Basic Performance Test
ZOTAC GAMING GeForce RTX 4070 Ti AMP AIRO In GPU-Z, you can see that the core part adopts the AD104 core chip of Ada Lovelace architecture. The process is TSMC 4 nm, and it has Cuda 7680 cores. The memory is Micron GDDR6X 192 – Bit 12288 MB (12GB), core clock is 2310 MHz, Boost clock is 2670 MHz, memory clock is 1313 MHz.
→ GPU-Z.
testing platform
Processor: Intel Core i9-12900K
Motherboard: ROG STRIX Z690-A GAMING WIFI D4
Memory: CORSAIR DOMINATOR PLATINUM RGB 3200 MHz CL16 16GBx2
Graphics card: ZOTAC GAMING GeForce RTX 4070 Ti AMP AIRO
Operating System: Windows 11 Pro
3DMark is a performance test software for simulating game graphics calculations level 3 A. The Fire Strike series simulates running DX11 games. In the Fire Strike test with FHD resolution, the RTX 4070 Ti AMP AIRO graphics card scored 55,004 points; 2K resolution The graphics card scored 27,249 points in the Fire Strike Extreme test at 4K resolution and 13,623 points in the Fire Strike Ultra test at 4K resolution.
→ 3DMark Fire Strike.
→ 3DMark Extreme Fire Strike.
→ 3DMark Ultra Fire Strike.
The DX12 API test is also conducted using 3DMark. The Time Spy series mainly tests the game’s performance under DX12. The default resolution is 2K. The RTX 4070 Ti AMP AIRO gets a graphics card score of 22,911 points, while the 4K Extreme test gets a graphics card score of 11,025 points.
→ 3DMark Time Spy.
→ 3DMark Time Spy Extreme.
Port Royal is a game simulation test that incorporates ray tracing technology. The default test resolution is 1440p. RTX 4070 Ti AMP AIRO passed the test and got a graphics card score of 14,214. The newly launched Speed Road test is also conducted at 1440p. decision, but uses It is developed with DirectX 12 Ultimate API, and many new technologies are applied in the design, and the score of the graphics card is 5,473 points in the test.
→ 3DMark Port Royal.
→ 3DMark Speedway.
In addition, in the NVIDIA DLSS feature test project, a DLSS 3 test was added. This test also includes DLSS 2 and DLSS 3. In the actual test, 1440p and 2160p are tested in performance mode, and 4320p is tested in ultra – high performance mode DLSS 2 can provide about 2~3 times of performance improvement, while DLSS 3 will improve performance even more, the results are for players’ reference.
→ NVIDIA 3DMark DLSS feature test.
game performance test
In the game testing section, select “Dianyu 2077”, “Watch Dogs: Free Legion”, “Far Cry 6”, “Forza: Horizon 5”, “Assassin’s Creed: Viking Age”, “Microsoft” Flight Simulator” and “Rainbow Six: Confined Area Evacuation” were tested, and the test resolutions were 1440p and 2160p for players to refer to.
AAA masterpieces can perform at over 100 FPS on average at 1440p, but playing AAA masterpieces at 2160p is relatively difficult for the RTX 4070 Ti, and most of them can average more than 60 FPS. Microsoft Flight Simulator only has about 50 frames.
→ Experience AAA masterpiece game.
The light chase game part is also in the performance-hungry games, and it is difficult to achieve 2160p 60FPS. However, because the RTX 40 series supports DLSS 3, the frame rate of “Dian Yu Ren Ke 2077” can be greatly increased after enabling DLSS 3. Improvement, 85 frame performance can also be achieved under 2160p. After testing the other games, the average resolution of 2160p can also have an average of more than 80FPS, or even an average of more than 100 frames.
→ Light chase game test.
→ Test DLSS 3 / DLSS 2 game.
authoring software tests
For the productivity test, Blender, a cross-platform 3D creation software, was chosen for the test. Under the Blender 3.4 Benchmark test, the number of samples per minute for the monster scene was 3776, and the junk shop was 1705, and that of the classroom was 1879.
→ Blender Benchmark 3.4.
V-Ray 5 ray tracing rendering software developed by Chaos Group has launched V-Ray 5 Benchmark to allow gamers to test their CPU and GPU performance in V-ray tracing rendering. Under the CUDA GPU V-Ray test, they obtained 2329 vpath, V -3088 vrays were obtained under the Ray GPU RTX test.
→ V-Ray 5 Benchmark GPU CUDA test.
→ V-Ray 5 Benchmark GPU RTX test.
temperature power consumption
The temperature and power consumption test is mainly based on the highest value of the entire platform, it has an i9-12900k processor. Through FurMark, Time Spy Stress Test, and GPU-Z, the temperature and power consumption under high load, DX12 game conditions and standby are simulated. . When RTX 4070 Ti AMP AIRO is at hand, the temperature is 33 degrees, and the power consumption of the whole platform is 95 W; when the Time Spy Stress Test is running, the temperature is 71 degrees, and the power consumption of the whole platform is 377 W; when FurMark 4xMSAA is running, the temperature is 69 degrees, The power consumption of the whole platform is 298 W.
→ Measure temperature.
→ Measure actual power consumption.
ZOTAC GAMING GeForce RTX 4070 Ti AMP AIRO 總結
ZOTAC launched the smaller performance model AMP ARIO on the RTX 4070 Ti. It is 30 cm long and 2.9 slots thick. Although the size of the radiator has been reduced, it still has good heat dissipation performance in actual measurements. to upgrade the RTX 40 series Gamers who have a graphics card but not much space in the case can choose a model with good performance.
In terms of performance, the RTX 4070 Ti is undoubtedly a relatively suitable model for most players. It can satisfy most AAA games with 60FPS in 4K resolution and 120FPS in 2K resolution. It can satisfy most AAA games with 60FPS in 4K resolution and 120FPS in 2K resolution.
Further reading:
