Abko Co., Ltd. (www.abko.co.kr CEO Kwang-Geun Oh) launched “Settler Hybrid PCI-E 5.1”, which allows all systems to be configured to the next generation in accordance with the classification of IS Fifth generation PCI-E hardware has been released, a high-speed data communications standard that’s twice as advanced as before.
Settler Hybrid fully prepared for 5th generation PCI-E hardware
Abco’s new Settler hybrid power supply uses fifth-generation PCI-E hardware, which has doubled the performance of communication bandwidth, communication throughput and frequency domain compared to current fourth-generation PCI-E and is 150% higher than the rated capacity of current 2nd generation ATX This product is fully prepared to respond stably by protecting against instantaneous power supply of 5th generation PCI-E hardware with wide power defense amplitude instantaneous up to 200% of the nominal capacity, beyond the instantaneous percentage. breadth of the defense of power.
Besides, it is designed to meet all conditions of INTEL ATX 3.1 standard except “2% low load section efficiency standard”, so it can be called “ATX 3.1 minor version”, so it can fully support PCIE 5th generation and new generation 12V. -Includes both 2×6 450W 16AWG cable and generation 6+2 18AWG cable, so you can use it without worrying about cable compatibility due to hardware replacement. However, if there is a change in power rating due to hardware replacement, replacement of the power supply may be necessary.
Settler Hybrid uses electricity more efficiently
The Settler Hybrid Power Supply is a BRONZE grade product certified for 86.218% power efficiency through rigorous testing by CYBENETICS, an INTEL-designated certification agency. Furthermore, the power factor is more than 0.910, the 5VSB efficiency is more than 70%, and the standby power is less than 0.25W.
The DC-DC and single-rail design, which can provide up to 100% of the power required by high-performance hardware, provides adequate and sufficient power, creating a safer operating environment.
Safety power supply, Settler Hybrid’s active PFC and protection circuit design
The Settler hybrid power supply blocks up to 99% of problems such as power loss, heat generation and harmonic noise from the power supply and hardware via active PFC, even if unusable current flows inside.
In addition, seven types of protection circuits are designed, including over-voltage protection, short-circuit protection, over-current protection, no-load protection, high-temperature protection, over-load protection and lightning protection, to safely prevent trouble from occurring. occur inside or outside the power supply. source is passed to the hardware, I do.
Settler Hybrid, made with high quality components
Settler hybrid power supply is made of high-quality components such as 105℃ capacitors, EMI filters and transformers made in Taiwan, which provide higher stability and longer lifespan even when using high power. In particular, the capacitors last approximately 4 times longer than 85℃ capacitors.
Through real-time monitoring, you can use the latest power management technologies from AMD and INTEL, such as technology that allows the artificial intelligence processor to optimally control power or achieve performance improvement per power consumption up to 20%. It has an instantaneous 200% defense amplitude and includes both existing and next-generation cables, so it can be used by users of existing standard and bronze-grade power products, from those using 1930s graphics cards to those who use graphics cards in the 1970s, even after the widespread use of PCIE5.X hardware, offers the advantage and cost-effectiveness of not having to change the power.
The Settler Hybrid Power Supply was released in black for 60,000 won and white for 65,000 won.
Article reports and inquiries news@cowave.kr
(c) Beyond price comparison for convenient shopping, Danawa (www.danawa.com)
#Abco #Launches #Settler #Hybrid #PCIE #5th #Generation #PCIe #Hardware #Danawa #DPG #Shares #Heart #DPG
