As unseasonably cold weather expands across parts of North America, homeowners are bracing for a potential threat to a significant investment: their swimming pools. While many pool owners in warmer climates enjoy a nearly year-round swimming season, the occasional “Arctic blast” can turn a backyard oasis into a high-stakes maintenance battle. When temperatures take a nosedive, the water inside pipes and equipment can freeze and expand with enough force to crack PVC, split pump housings, and burst expensive heater coils.
Protecting that investment during these dips doesn’t necessarily require a full closing of the pool. In fact, if caught off guard by a sudden freeze, there are several tactical steps that can be taken to keep the water flowing and the equipment intact. Mastering the basics of winter pool care is the difference between a seamless spring opening and a multi-thousand-dollar repair bill, according to industry experts.
The Number One Rule: Movement is Life
The most effective way to prevent ice from forming inside plumbing is to keep the water moving. Moving water is significantly harder to freeze than stagnant water because the friction of the molecules creates a small amount of heat, and the constant flow prevents ice crystals from “stacking” and solidifying.
When a cold snap is in the forecast, homeowners should prioritize the following:
- Run the Pump 24/7: If a system doesn’t have an automatic freeze protector, manually switch the pump to run continuously until temperatures rise above 40°F.
- Open All Valves: Ensure that water is circulating through every part of the system, including spa jets, waterfalls, and fountain lines. Any “dead-end” pipe with still water is a prime candidate for a burst.
- Maintain Water Levels: Check that the water is at the midpoint of the skimmer. If the level drops too low, the pump could suck in air, lose its prime, and stop moving water—leaving the entire system vulnerable.
Insulating the “Heart” of the System
Even with the pump running, the equipment pad is often the most exposed area of a property. Exposed PVC pipes lose heat much faster than those buried underground. For added security, a “thermal hug” can be provided to the pump and filter.
Draping heavy moving blankets or even old sleeping bags over the equipment can help retain the heat generated by the pump motor. For an extra layer of protection, some homeowners use a heavy-duty tarp over the blankets to keep them dry. However, it is vital to ensure that the motor’s air intake remains unobstructed; the goal is to trap heat around the pipes, not suffocate the motor and cause it to overheat.
Navigating Power Outages
The most challenging scenario during a cold snap is a loss of electricity. If the power goes out and pumps stop, the clock starts ticking. In this situation, the goal shifts from “circulation” to “drainage.”
According to safety guidelines from the American Red Cross, once water stops moving in freezing temperatures, the threat of expansion must be removed immediately. Locate the drain plugs on the pump, filter, and heater. Pull them out and store them in the pump basket to avoid losing them. Opening the air relief valve on top of the filter will help the water drain out faster, ensuring that if ice does form, it has room to expand without breaking the equipment.
The Role of Freeze Protection Technology
For those living in regions where freezes are becoming more common, relying on manual switches can be risky. Modern automation systems now include “freeze protection” sensors that automatically activate the pumps when the air temperature hits a specific threshold (usually around 34°F to 38°F).
For those without full automation, standalone freeze protection timers are a relatively inexpensive upgrade. These devices monitor the ambient temperature and act as an “insurance policy” for those nights when a homeowner might be asleep or away from home when the frost arrives.
Don’t Forget the Skimmers
While focus often centers on the pipes, the skimmer mouth is another vulnerable spot. If the water in the skimmer freezes, it can crack the plastic housing. A simple trick is to place a partially filled plastic water bottle or a dedicated “Gizzmo” into the skimmer. This provides a collapsible “crush zone” that absorbs the pressure of the expanding ice, protecting the rigid walls of the skimmer itself.
As of , pool maintenance companies are urging homeowners to proactively prepare for potential cold snaps. The Insurance Institute for Business & Home Safety highlights why proactive maintenance is the best defense against cold-weather claims. Winterizing a mindset is just as important as winterizing equipment. By keeping a close eye on the forecast and having drain plugs ready for an emergency, homeowners can navigate the coldest months with confidence.
